.jpg)
.jpg)
.jpg)
Self-propelled machine for the insertion or screw supports for guard rails and rubber tracks.
| Technical features: | |
|---|---|
| Weight | kg 3500 |
| Dimensions closed machine with lifted column | Length 1930 mm Width 2200 mm Height 2600 mm (without pole slide) |
| Movements hydraulic | 1. Hammer starter stroke 2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm 4. Stroke translator 130+130 mm 5. Column inclination from +10° to -51° 6. Slide inclination (training) from + 9,5° to -9,5° 7. Down/up movement of the column stroke 500 mm 8. Left track control 9. Right track control |
| Power Oil sets on the machine | 170 BAR |
| Hydraulic system | to open cicuit |
| Hydraulic pump | at gear |
| Capacity oil tank | 120 LT |
| Translation's speed of machine | 2,12 KM/H |
| Engagement in HP | 36 |
| Maximum highest post | 2.900 mm |
| HAMMER: | |
| Impact power | 950 JOULE |
| Impact rate | 620÷1500 stroke/min. |
| Weight | kg 200, in working time kg 350 |
| Oil flow rate | 60 - 90 LT./MIN. |
| Power oil sets on the hammer | 170 BAR |
| ENGINE YANMAR 4TNV88: | |
| n° cylinder | 4 |
| Swept volume | 2.190 CM3 |
| Power at 3.000 RPM | 35,4 KW |
| Power at 2.600 RPM | 31,3 KW |
| Air cooled | completed with starting |
| Filter | Electric and dry |
| ACCESSORIES INCLUDED WITH MACHINE | Chain at four hooks for lifting machine (standard) |
| ACCESSORIES ON REQUEST | - Mechanical extractor - Hydraulic core bore - Pneumatic D.T.H. hammer - Automatic verticality - GPS - System for the screwing of screw in the soul |